IMET
IMET {Institute of Mobile Engineering And Technology} India's No.1 Mobile Phone Repairing And Training Institute 6 Years of Experience In Mobile Repairing..
This is featured post 2 title
Replace these every slider sentences with your featured post descriptions.Go to Blogger edit html and find these sentences.Now replace these with your own descriptions.This theme is Bloggerized by Lasantha - Premiumbloggertemplates.com.
This is featured post 3 title
Replace these every slider sentences with your featured post descriptions.Go to Blogger edit html and find these sentences.Now replace these with your own descriptions.This theme is Bloggerized by Lasantha - Premiumbloggertemplates.com.
Disclaimer
Disclaimer. These Images Are Uploaded By BuntyGSM For Teaching And Study Purpose So We Will Not Be Responsible For Any Damage In Your Mobile It Is Your Responsibility To Use The Method As Mentioned In The Posts.
Nokia 1202, 1203, 1661, 1662, 5030c LCD Blank Going Off After Few Seconds 100000% Solution By BuntyGSM
Posted by Bijendra Kumar Narsinghani on 10:00 AM
Nokia 1200, 1208, 1209 LCD Blank Going Off After Few Seconds 100000% Solution By BuntyGSM
Posted by Bijendra Kumar Narsinghani on 9:52 AM
Latest Nokia Universal IMEI Changer 2011 By BuntyGSM
Posted by Bijendra Kumar Narsinghani on 11:03 PM
27.06.2011 - MTB NK 2.38.3 setup - SL3 over USB supported
Posted by Bijendra Kumar Narsinghani on 10:56 PM
Discussion thread.
Please post here all your problems and recommendations regarding this update.
What's new:
• Unlock over USB for SL3 phones for: Rapido, RapuYama, Rap3v4
• USB read for RPL on RapuYama, Rap3v4 ( certificates, simlock, sx4 (generate if doesn't exist), wmdrm, cmla) - ( ReadImeiBackup button )
Notes on RPL functionality:
On USB full support for rapido is also available, but works on some of the models ( like n97) and is unstable or doesn't work on others ( for certificate read)
Writing through USB: for certificates works fine on RAPU, RAP3V4, works on some rapido (n97)
For serial commands works ok if length of command is small
For large data FBUS needs to be used because Nokia software ( either driver or phone) blocks when it receive large command
We strongly recommend if the phone will be erased after backup, first try to write the RPL to make sure all data was backed up ok, and then
erase.
Please note:
Effectively if SX4 is damaged in order to repair it, one must make backup of RPL and then send the backup to phone using 'Write RPL
BB5'. After that MT will be able to authorize sx4.
Download:
MTB NK 2.38.3 - Rapid Share
MTB NK 2.38.3 - Mega Upload
MTB NK 2.38.3 - Media Fire
MTB NK 2.38.3 - Hot File
Please post here all your problems and recommendations regarding this update.
What's new:
• Unlock over USB for SL3 phones for: Rapido, RapuYama, Rap3v4
• USB read for RPL on RapuYama, Rap3v4 ( certificates, simlock, sx4 (generate if doesn't exist), wmdrm, cmla) - ( ReadImeiBackup button )
Notes on RPL functionality:
On USB full support for rapido is also available, but works on some of the models ( like n97) and is unstable or doesn't work on others ( for certificate read)
Writing through USB: for certificates works fine on RAPU, RAP3V4, works on some rapido (n97)
For serial commands works ok if length of command is small
For large data FBUS needs to be used because Nokia software ( either driver or phone) blocks when it receive large command
We strongly recommend if the phone will be erased after backup, first try to write the RPL to make sure all data was backed up ok, and then
erase.
Please note:
Effectively if SX4 is damaged in order to repair it, one must make backup of RPL and then send the backup to phone using 'Write RPL
BB5'. After that MT will be able to authorize sx4.
Download:
MTB NK 2.38.3 - Rapid Share
MTB NK 2.38.3 - Mega Upload
MTB NK 2.38.3 - Media Fire
MTB NK 2.38.3 - Hot File
Nokia 1110, 1110i, 1112, 1600, 2310, 2610, 2626, 6030 LCD Blank Going Off After Few Seconds 100000% Solution By BuntyGSM
Posted by Bijendra Kumar Narsinghani on 9:21 AM
v3.5 revision 1.2, Public-Release - MAJOR UPDATE - The only BOX with TMA included
Posted by Bijendra Kumar Narsinghani on 8:56 AM
v3.5 revision 1.2, Public-Release
MAJOR UPDATE
What is new:
MAIN
- Added, Files synchronization feature
- Allows to check and update important files with server without installing full setup.
- Also useful to minimize problems because of users patch.
- Fixed, Access violation on XP for PC without HTI(WinUsb) installed
- Check For updates and Single module update removed(replaced with Synchronize Files)
NK(Nokia Service Tool)
- Added, optional SX5 serial used for SL3 NCK calc (*)
(*) required HTI firmware version 00.17 or later
- Added, Latest flash update definition to setup
- Added, Options to disable/enable RAPIDO new protocol for USB flashing
- Added, Options to disable/enable embedded SBL for XGOLD flashing
- Added, HTI SoftTMA Resistor selection (*)
(*) required HTI firmware version 00.17 or later
- Added, Local storage definition for DCC and RFBB data.
- Added, DCC data verify after write
- Improved, DCC data write (If DCC write fail, DATA will be written as PM)
- Fixed, Download in background deadlock bug
- Fixed, PM erase bug (was early stopped on newer BB5 phone)
- Fixed, DCT4 flashing
- Fixed, New ProductProfile write
QCD(CDMA Service Tool)
- updated patch definition to version 1.4
- added unlock definition for: Haier Q9+-INAV1.04-100326-JWD, method: patch unlock
- added unlock definition for: ZTE SM_C36X_RBTL05NV1.0.0B05, method: direct unlock (not tested!)
- fixed unlock definition for: ZTE TM_S189_RBTL35NV1.0.2B01, method: direct unlock
- fixed unlock definition for: ZTE TM_S168_RBTL35NV1.0.0B02, method: direct unlock
- see "modules\{9A05071F-D3A6-484B-8E3E-C6F47311C78C}\supported_phones.txt" for list supported models
BB (BlackBerry Tool)
- Added, Factory lock status on device scan
- Minor bug fixes
420 Links to download MxBox/MxKey v3.5 rev1.2 for FREE
1. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
2. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
3. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
4. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
5. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
6. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
7. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
8. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
9. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
10. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
11. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
12. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
13. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
14. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
15. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
16. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
17. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
18. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
19. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
20. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
21. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
22. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
23. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
24. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
25. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
26. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
27. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
28. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
29. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
30. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
MAJOR UPDATE
What is new:
MAIN
- Added, Files synchronization feature
- Allows to check and update important files with server without installing full setup.
- Also useful to minimize problems because of users patch.
- Fixed, Access violation on XP for PC without HTI(WinUsb) installed
- Check For updates and Single module update removed(replaced with Synchronize Files)
NK(Nokia Service Tool)
- Added, optional SX5 serial used for SL3 NCK calc (*)
(*) required HTI firmware version 00.17 or later
- Added, Latest flash update definition to setup
- Added, Options to disable/enable RAPIDO new protocol for USB flashing
- Added, Options to disable/enable embedded SBL for XGOLD flashing
- Added, HTI SoftTMA Resistor selection (*)
(*) required HTI firmware version 00.17 or later
- Added, Local storage definition for DCC and RFBB data.
- Added, DCC data verify after write
- Improved, DCC data write (If DCC write fail, DATA will be written as PM)
- Fixed, Download in background deadlock bug
- Fixed, PM erase bug (was early stopped on newer BB5 phone)
- Fixed, DCT4 flashing
- Fixed, New ProductProfile write
QCD(CDMA Service Tool)
- updated patch definition to version 1.4
- added unlock definition for: Haier Q9+-INAV1.04-100326-JWD, method: patch unlock
- added unlock definition for: ZTE SM_C36X_RBTL05NV1.0.0B05, method: direct unlock (not tested!)
- fixed unlock definition for: ZTE TM_S189_RBTL35NV1.0.2B01, method: direct unlock
- fixed unlock definition for: ZTE TM_S168_RBTL35NV1.0.0B02, method: direct unlock
- see "modules\{9A05071F-D3A6-484B-8E3E-C6F47311C78C}\supported_phones.txt" for list supported models
BB (BlackBerry Tool)
- Added, Factory lock status on device scan
- Minor bug fixes
420 Links to download MxBox/MxKey v3.5 rev1.2 for FREE
1. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
2. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
3. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
4. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
5. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
6. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
7. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
8. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
9. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
10. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
11. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
12. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
13. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
14. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
15. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
16. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
17. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
18. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
19. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
20. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
21. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
22. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
23. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
24. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
25. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
26. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
27. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
28. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
29. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
30. 14 links for mobileEx_setup_v3.5_rev1.2_20110624.exe
Nokia 6120c, E63, E71, E51 Blue Disply Easy Solution By BuntyGSM
Posted by Bijendra Kumar Narsinghani on 11:46 PM
Disclaimer
Disclaimer. These Images Are Uploaded By BuntyGSM For Teaching And Study Purpose So We Will Not Be Responsible For Any Damage In Your Mobile It Is Your Responsibility To Use The Method As Mentioned In The Posts.
Follow Road Map
Suggested Routes
- 5.7 km, 8 minsMDR 34W and NH 119
| Driving directions to IMET (Institute Of Mobile Engineering & Technology) |
Meerut Railway Station Meerut, Uttar Pradesh India |
| | 1. Head toward MDR 34W north on Unknown road | |
| | 550 m | |
| | 2. Turn right onto MDR 34W | |
| | 750 m | |
| | 3. Turn right to stay on MDR 34W Pass by Railway Road Police Station (on the right in 1.4 km) | |
| | 1.5 km | |
| | 4. Turn left onto NH 119 Pass by Gupta Store (on the left in 2.1 km) | |
| | 2.6 km | |
| | 5. Turn right onto Mavana Rd Destination will be on the left | |
| | 350 m |
Follow Road Map
Suggested routes
- 1.5 km, 3 minsNH 119
- 1.7 km, 4 minsNH 119 and Mavana Rd
- 15 minsOr Walk
| Driving directions to IMET (Institute Of Mobile Engineering & Technology) |
Roadways Bus Station NH 119, Thapar Nagar Meerut, Uttar Pradesh 250002, India |
| | 1. Head toward Gurudwara Rd northeast on NH 119 Pass by Gupta Store (on the left in 700 m) | |
| | 1.1 km | |
| | 2. Turn right onto Mavana Rd Destination will be on the left | |
| | 350 m |
Institute of Mobile Engineering And Technology
IMET {Institute of Mobile Engineering And Technology}
Mobile Repairing Institute
India's No.1 Mobile Phone Repairing And Training Institute 8 Years of Experience In Mobile Repairing.
Learn Mobile Repairing Course From IMET Providing You The Best Training Manual and Computerized On All Types of GSM And CDMA Phone From Our Best Trained Teachers Contact Us For More Detail. +919411667220
All Mobile and Computer Software Available and all Mobile Cable and Device available contact on this No +919411667220
248, Govind Plaza, Lalkurti, Meerut Cantt. (UP) 250004
Email: bijendra.narsinghani@gmail.com
Mobile Repairing Institute
India's No.1 Mobile Phone Repairing And Training Institute 8 Years of Experience In Mobile Repairing.
Learn Mobile Repairing Course From IMET Providing You The Best Training Manual and Computerized On All Types of GSM And CDMA Phone From Our Best Trained Teachers Contact Us For More Detail. +919411667220
All Mobile and Computer Software Available and all Mobile Cable and Device available contact on this No +919411667220
248, Govind Plaza, Lalkurti, Meerut Cantt. (UP) 250004
Email: bijendra.narsinghani@gmail.com



















