IMET
IMET {Institute of Mobile Engineering And Technology} India's No.1 Mobile Phone Repairing And Training Institute 6 Years of Experience In Mobile Repairing..
This is featured post 2 title
Replace these every slider sentences with your featured post descriptions.Go to Blogger edit html and find these sentences.Now replace these with your own descriptions.This theme is Bloggerized by Lasantha - Premiumbloggertemplates.com.
This is featured post 3 title
Replace these every slider sentences with your featured post descriptions.Go to Blogger edit html and find these sentences.Now replace these with your own descriptions.This theme is Bloggerized by Lasantha - Premiumbloggertemplates.com.
Disclaimer
Disclaimer. These Images Are Uploaded By BuntyGSM For Teaching And Study Purpose So We Will Not Be Responsible For Any Damage In Your Mobile It Is Your Responsibility To Use The Method As Mentioned In The Posts.
RX TX Finding In China Mobile
Posted by Bijendra Kumar Narsinghani on 9:28 PM

It is tasted and also you can test it.
1 step is, we need to find GND from phone.
2 step is, we should power on phone (operation with dead phone:
phone must be 100% dead by software)and take multimater put it to voltage.
3 multimeter (-) line put it GND and with (+) line check each connectors
, and usually Tx= 1.8v or 2.8v and Rx=1.7v or 2.7v
(it will be change by processor but strongly 1.7v or 2.8v not 3v or 4v)
This way is too easy and you will save a more time.
For example!
You have got new brand China miracle phone with USB cable. It has got
12 pin. You must find (Infinity team give good Idea 1.2.3 punkts):
1) GND usually it has got 2 GND. (now we have got 10 pins)
2) We will uncheck USB + and USB- (VSS) just with checking by USB cable (now we have 8 pins)
3) By USB cable we also uncheck V bat+, ac adaptor + polarization (now we have 7 pins)
4) Now from this 7 pins you will find 1 or 3 not used pins (last operation we have 3 or 6 pins to find Rx Tx signals)
5) Now at last operation you should use good multimeter just to find Rx Tx with 1.7v-2.7v or 1.8v-2.8v
6) WHEN PHONE IS POWERD OFF TX AND GND WITH MULTIMETER MAKING BEEEEEP
(DIOD TEST OPERATION), WHEN PHONE POWERED ON IT WILL SHOW LIKE DIOD
RESISTANS 600-700 OHM BETWIN TX AND GND

--------------------------------------------------------------------------------
For More Information Continue Visit on http://buntygsm.blogspot.com M ore Use full Information Coming Soon. Wait For More New Information.
And Post Your Comments In All Post. Contact No +919411667220
1 step is, we need to find GND from phone.
2 step is, we should power on phone (operation with dead phone:
phone must be 100% dead by software)and take multimater put it to voltage.
3 multimeter (-) line put it GND and with (+) line check each connectors
, and usually Tx= 1.8v or 2.8v and Rx=1.7v or 2.7v
(it will be change by processor but strongly 1.7v or 2.8v not 3v or 4v)
This way is too easy and you will save a more time.
For example!
You have got new brand China miracle phone with USB cable. It has got
12 pin. You must find (Infinity team give good Idea 1.2.3 punkts):
1) GND usually it has got 2 GND. (now we have got 10 pins)
2) We will uncheck USB + and USB- (VSS) just with checking by USB cable (now we have 8 pins)
3) By USB cable we also uncheck V bat+, ac adaptor + polarization (now we have 7 pins)
4) Now from this 7 pins you will find 1 or 3 not used pins (last operation we have 3 or 6 pins to find Rx Tx signals)
5) Now at last operation you should use good multimeter just to find Rx Tx with 1.7v-2.7v or 1.8v-2.8v
6) WHEN PHONE IS POWERD OFF TX AND GND WITH MULTIMETER MAKING BEEEEEP
(DIOD TEST OPERATION), WHEN PHONE POWERED ON IT WILL SHOW LIKE DIOD
RESISTANS 600-700 OHM BETWIN TX AND GND

--------------------------------------------------------------------------------
For More Information Continue Visit on http://buntygsm.blogspot.com M ore Use full Information Coming Soon. Wait For More New Information.
And Post Your Comments In All Post. Contact No +919411667220
Nokia 1202, 1203 Local Mode, Test Mode, Charger Not Supported Solution
Posted by Bijendra Kumar Narsinghani on 2:04 PM
Disclaimer
Disclaimer. These Images Are Uploaded By BuntyGSM For Teaching And Study Purpose So We Will Not Be Responsible For Any Damage In Your Mobile It Is Your Responsibility To Use The Method As Mentioned In The Posts.
Follow Road Map
Suggested Routes
- 5.7 km, 8 minsMDR 34W and NH 119
| Driving directions to IMET (Institute Of Mobile Engineering & Technology) |
Meerut Railway Station Meerut, Uttar Pradesh India |
| | 1. Head toward MDR 34W north on Unknown road | |
| | 550 m | |
| | 2. Turn right onto MDR 34W | |
| | 750 m | |
| | 3. Turn right to stay on MDR 34W Pass by Railway Road Police Station (on the right in 1.4 km) | |
| | 1.5 km | |
| | 4. Turn left onto NH 119 Pass by Gupta Store (on the left in 2.1 km) | |
| | 2.6 km | |
| | 5. Turn right onto Mavana Rd Destination will be on the left | |
| | 350 m |
Follow Road Map
Suggested routes
- 1.5 km, 3 minsNH 119
- 1.7 km, 4 minsNH 119 and Mavana Rd
- 15 minsOr Walk
| Driving directions to IMET (Institute Of Mobile Engineering & Technology) |
Roadways Bus Station NH 119, Thapar Nagar Meerut, Uttar Pradesh 250002, India |
| | 1. Head toward Gurudwara Rd northeast on NH 119 Pass by Gupta Store (on the left in 700 m) | |
| | 1.1 km | |
| | 2. Turn right onto Mavana Rd Destination will be on the left | |
| | 350 m |
Institute of Mobile Engineering And Technology
IMET {Institute of Mobile Engineering And Technology}
Mobile Repairing Institute
India's No.1 Mobile Phone Repairing And Training Institute 8 Years of Experience In Mobile Repairing.
Learn Mobile Repairing Course From IMET Providing You The Best Training Manual and Computerized On All Types of GSM And CDMA Phone From Our Best Trained Teachers Contact Us For More Detail. +919411667220
All Mobile and Computer Software Available and all Mobile Cable and Device available contact on this No +919411667220
248, Govind Plaza, Lalkurti, Meerut Cantt. (UP) 250004
Email: bijendra.narsinghani@gmail.com
Mobile Repairing Institute
India's No.1 Mobile Phone Repairing And Training Institute 8 Years of Experience In Mobile Repairing.
Learn Mobile Repairing Course From IMET Providing You The Best Training Manual and Computerized On All Types of GSM And CDMA Phone From Our Best Trained Teachers Contact Us For More Detail. +919411667220
All Mobile and Computer Software Available and all Mobile Cable and Device available contact on this No +919411667220
248, Govind Plaza, Lalkurti, Meerut Cantt. (UP) 250004
Email: bijendra.narsinghani@gmail.com
























