IMET
IMET {Institute of Mobile Engineering And Technology} India's No.1 Mobile Phone Repairing And Training Institute 6 Years of Experience In Mobile Repairing..
This is featured post 2 title
Replace these every slider sentences with your featured post descriptions.Go to Blogger edit html and find these sentences.Now replace these with your own descriptions.This theme is Bloggerized by Lasantha - Premiumbloggertemplates.com.
This is featured post 3 title
Replace these every slider sentences with your featured post descriptions.Go to Blogger edit html and find these sentences.Now replace these with your own descriptions.This theme is Bloggerized by Lasantha - Premiumbloggertemplates.com.
Disclaimer
UFS HWK Suite Setup v02.10.000
Posted by Bijendra Kumar Narsinghani on 11:26 PM
WARNING !!!If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.
You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.
You MUST be running HWK software 2.0.10.0 to access support.
UFS_DCTxBB5 v2.0.10.0
-----------------------
1. New BB5 products:
RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635
(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)
2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.
4. McuSw tag fixed in vpl parser.
5. Fixed time-out bug for some RAPU models.
6. [Det.Log] CheckBox now active, can auto create LOG file.
7. [Info] Shows Camera DCC settings and Status (for both Cameras)
8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
9. Increased PM read default margins, to have DCC in read PM for DCT4+
10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
11.Fixed [Format] bug for new BB5 Symbian products.
12.ENO File flashing support (E63,E66,..,N97,..)
13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20
14.[Check] Shows PASUBTOC SL related contents.
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.
LG GSM V 2.0.10.0
------------------
1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.
2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.
3. Infineon New Flash Chip SV7E3204UTA support.
4. ADI KG129,KG248,KG298 added.
5. " Cannot open file " Bug Fixed.
SAMs V 2.0.10.0
----------------
TRIDENT
C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,
X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
TRIDENT VISION
B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,
S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)
USB UI functions introduced, allows to unlock USB only phones.
USB flashing introduced (Approx. 5x faster)
(Cannot use USB flashing of dead phones which have UL erased or damaged.
RJ45 flashing can be used to recover from erased UL situation)
SWIFT
A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,
C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,
F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,
S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
B5702,D988,F265L,S5050 (SECT) bug fixed.
CSC Area format added.
SWIFT-AEROFONE
A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,
E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)
E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,
E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
SWIFT-3G
C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
P270 (CUNL,SECT) bug fixed.
E2P Write is supported only for C5130,C5130S and C5130U.
QUALCOMM
A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,
A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,
S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,
S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.
Fixed flashing of non page size aligned files (rc1,rc2,ffs)
Added flashing support for QSC62xx models.
UNLOCK and UNFREEZE added for these models:
A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,
S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
BROADCOM
QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !
COMMON
Log to file added.
CLONE error message fixed.
Release Date: 24/03/2010
UFS_DCTxBB5 v2.0.10.1
-----------------------
1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.
2. Box Init bug after BB5 flash fixed.
Release Date: 27/03/2010
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
This release contains a new update client which you ONLY need to run if you have the message "None Authorised Copy of Software detected, Please Use Original Install Package:0" That means users without the message do not need to run this new update client, but if you do no harm will be done, you just lose 1 log.
UFS_SAMs v2.0.10.2
--------------------
SWIFT-AEROFONE
T239 added (CUNL,FL)
BROADCOM
Fixed UnFreeze Key Display.
Many thanks to all those who have supported us!!!
HWK Support Suite Setup v02.10.000
--------------------------------------------------------------------------------
For More Information Continue Visit on http://buntygsm.blogspot.com More Use full Information Coming Soon. Wait For More New Information.
And Post Your Comments In All Post.
For More Information Continue Visit on http://buntygsm.blogspot.com More Use full Information Coming Soon. Wait For More New Information.
And Post Your Comments In All Post.
Clon HWK_Suite_Setup_v02.09.000 10000000000000% Tested
Posted by Bijendra Kumar Narsinghani on 11:23 PM
Nokia DCT4 Contact Service Hardware or Software Easy To Find
Posted by Bijendra Kumar Narsinghani on 11:16 PM
MXKEY v3.3 revision 1.7, Public-Release
Posted by Bijendra Kumar Narsinghani on 12:29 AM
MAIN- Added, support for JAF BOX firmware 01.B4
- Fixed, Runtime Error when multiple instance loaded
- Small ui changes, added module icon in menu.
NK
- Added, BB5 Warranty Unlock function !!! FIRST IN THE WORLD !!!
Warranty Unlock will read unlock codes without direct write to the phone.
Thus will make sure that the phone`s warranty is not void, a window will display the phone information, unlock codes and intruction to enter the codes as well.
~ a template file as html doc located to "\modules\{3EBAF427-9F55-419F-8A75-385DFC651169}\codtemplate.htm".
~ you might edit this template as you want as long as keep the variables "%model%","%imei%","%provider%","%codes%" and %codes7%.
- Added, CMLA_KEY and SUPERDONGLE_KEY RPL backup
- Added, New Loader/Protocol support for JAF BOX (RAPIDO,RAPU based phones)
- Added, Multi-ReLock support
As requested by some user, now possible to LOCK the phone to multi-providers.
As the providers settings are maybe outdated, you might need to edit the providers list:
ini file setting located to "\modules\{3EBAF427-9F55-419F-8A75-385DFC651169}\providers.ini".
the format is [8DIGIT MCC+MNC]=[PROVIDER_NAME]|COUNTRY
eg: 23430000=Virgin|United Kingdom
- Added, Method1 (old) and Method2 (new) option for DCT4PLUS SIMLOCK Patch (will be used in future DCT4PLUS unlock updates)
~ Fast Flash routine will collect the list image files and process with one boot.
NK - Previous changes(rev 1.6 Partial-Update)
- Added BB5 RAP3GV4 USB Flashing(eg. Nokia X3-00,X6-00)
- Added Dead Usb option for normal usb flashing (This will force software to use dead usb protocol without need to reconnect the Nokia USB ROM connection)
- Many Minor bug fixes
BB - Previous changes(rev 1.6 Partial-Update)
- Added, manual checkbox to allow input IMEI+MEP manually(in case of usb connection problem).
- Added, Engineering Screen Unlock code calc.
WARNING: Do NOT give away free BlackBerry codes using MXKEY
Posted by Bijendra Kumar Narsinghani on 12:22 AM
Nokia Care Suite v13.0
Posted by Bijendra Kumar Narsinghani on 8:34 PM
1.3.6 2009.13.0 of Nokia Care Suite is available. This multi-protocol service software
supports Nokia CDMA products and limited functions of GSM and WCDMA products.
Please note that this release should be considered a beta release for GSM/WCDMA models
This release should only be posted in NOL for all CDMA markets and India.
Service SW installation packages and Technical Bulletins are available from NOL.
CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 1.3.5 2008.42.5
• Multi flashing tools have been enabled for CDMA (GSM also, but it doesn´t work)
• Connection can be added without restarting Care Suite
• Improvements enabling Fuse application to close properly
• Finish - button available after recovery is finished
• Improvements enabling PST application to close properly
• Plugins are displayed correctly
• Improvements to product log writing
• Nokia Care Suite icon is visible on the desktop
• Error shown when a product without supported is connected
• Improvements to “Number of storing days” field for Product Log
• Error occures when product log location is set to non existing location
• Self test reporting only activated for RH-111
KNOWN ERRORS & LIMITATIONS
• Error message appears Setiings Editor when user wants to open settings file
• CDMA multi provisioning can not program PRL, ERI, Contacts and MDN information
• CDMA Settings editor not compatible with N8208 / RM-384 and N2608 / RM-376
• Fatal Error occurs when closing Product Support Vista
• Message 'fatal error during installation' may be shown
• Error during uninstallation may be shown
• Fuse Problems with N1202 / RH-111 detecting
• Fuse Confirmation dialog during changing connection's name does not work properly
• Multi Refurbish/Automatc start in Multi Refurbish process doesn't work properly when user
connects new product
• UI elements and WinVista do not work properly
• Scroll bar in Fuse doesn't change its position when user drag and drop it
• Internal Module Error during N96 / RM-247 refurbish
• Downloading software update package fails during multi refurbish
• Fuse: An error occurs while attempting to close the dialog
• Software Update/ Error messages appear during DCT-4 update process
• Application Launcher is not closed after downloading NCS update package.
Nokia_Care_Suite_Store_2009_13_0.msi
Net frame work 2.0 DOwnload( as it is required for nokia care suit to run)
here is the guide for newbies Download:
supports Nokia CDMA products and limited functions of GSM and WCDMA products.
Please note that this release should be considered a beta release for GSM/WCDMA models
This release should only be posted in NOL for all CDMA markets and India.Service SW installation packages and Technical Bulletins are available from NOL.
CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 1.3.5 2008.42.5
• Multi flashing tools have been enabled for CDMA (GSM also, but it doesn´t work)
• Connection can be added without restarting Care Suite
• Improvements enabling Fuse application to close properly
• Finish - button available after recovery is finished
• Improvements enabling PST application to close properly
• Plugins are displayed correctly
• Improvements to product log writing
• Nokia Care Suite icon is visible on the desktop
• Error shown when a product without supported is connected
• Improvements to “Number of storing days” field for Product Log
• Error occures when product log location is set to non existing location
• Self test reporting only activated for RH-111
KNOWN ERRORS & LIMITATIONS
• Error message appears Setiings Editor when user wants to open settings file
• CDMA multi provisioning can not program PRL, ERI, Contacts and MDN information
• CDMA Settings editor not compatible with N8208 / RM-384 and N2608 / RM-376
• Fatal Error occurs when closing Product Support Vista
• Message 'fatal error during installation' may be shown
• Error during uninstallation may be shown
• Fuse Problems with N1202 / RH-111 detecting
• Fuse Confirmation dialog during changing connection's name does not work properly
• Multi Refurbish/Automatc start in Multi Refurbish process doesn't work properly when user
connects new product
• UI elements and WinVista do not work properly
• Scroll bar in Fuse doesn't change its position when user drag and drop it
• Internal Module Error during N96 / RM-247 refurbish
• Downloading software update package fails during multi refurbish
• Fuse: An error occurs while attempting to close the dialog
• Software Update/ Error messages appear during DCT-4 update process
• Application Launcher is not closed after downloading NCS update package.
Nokia_Care_Suite_Store_2009_13_0.msiNet frame work 2.0 DOwnload( as it is required for nokia care suit to run)here is the guide for newbies Download:
Fromat Code For Nokia 3110, 7210, 5130, 5220
Posted by Bijendra Kumar Narsinghani on 11:13 PM
Huawei, Vodafone Modem Unlocking Software Free
Posted by Bijendra Kumar Narsinghani on 8:41 PM
INDIAN Tata Indicom Walky C2 (CORDLESS) Unlock FREE FREE
Posted by Bijendra Kumar Narsinghani on 10:19 PM
you want to convert in sim base your c2 walky
first insert this code *2003#
than push select button
enter spc six time zero
than menu open go to "phone disposition" option
than push select button
than select r-uim only your c2 convert in sim base
use any cdma sim.
.::enjoy::.
--------------------------------------------------------------------------------
For More Information Continue Visit on http://buntygsm.blogspot.com More Use full Information Coming Soon. Wait For More New Information.
And Post Your Comments In All Post.
first insert this code *2003#
than push select button
enter spc six time zero
than menu open go to "phone disposition" option
than push select button
than select r-uim only your c2 convert in sim base
use any cdma sim.
.::enjoy::.
--------------------------------------------------------------------------------For More Information Continue Visit on http://buntygsm.blogspot.com More Use full Information Coming Soon. Wait For More New Information.
And Post Your Comments In All Post.
Disclaimer
Railway Stattion To IMET Road Map
Follow Road Map
Roadways Bus Station To IMET Road Map
Follow Road Map
Visitors
Institute of Mobile Engineering And Technology
Mobile Repairing Institute
Mobile Repairing Institute
Mobile Repairing Institute
Mobile Repairing Institute
